Table Of Contents; Deploying 1:1 Power Redundancy - HP 12500 Quickspecs
12500 series
Hide thumbs
Also See for 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
QuickSpecs
Configuration
Power Cord: Quantity :6, NEMA 6-20P / L6-20P, C19 STRAIGHT, 250 V, 20 A, 2.5 meters, 8.21 feet, Store Part#
:8120-6360
Part Store URL:
http://h20141.www2.hp.com/Hpparts/CountryChoice.aspx?mscssid=&valid=False
Note 1
Supported on Switches JC654A, JF431C and JF430C only.
Note 2
Supported on Switches JC655A, JC652A and JC653A only.
Remarks:
12504 and 12508 only - Default 6 power supplies and allow the user to change down to 3.
12518 only - Default 12 power supplies and allow the user to change down to 6.
The power module support load balancing and N+1/N+M redundancy. Deploying N+1 power redundancy
The total number of power modules (JF431C, JF430C) = Ceiling (total power load of the chassis/2000) + 1
For example, if the total load of the chassis is 3000 W, the number of power modules must be 2 + 1 = 3.
JF431C-Requires 6 power modules.
JF430C-Total number of power modules = [Ceiling (total power load of the chassis/2000) ] x 2
For example, if the total power load of the chassis is 7000 W, the total number of power modules must be (4
+ 1) x 2 = 10.
Power Electrical Module
12504 and 12508 Only - System (std 0 // max 1) User Selection (min 1 // max 1)
HP 12500 AC Power Entry Module
PDU Cable NA/MEX/TW/JP
C19 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C19 to C20 Jumper Cord
High Volt Power Entry Module to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Note 1
Supported on Switch JC654x, JF431x and JF430x only.
DA - 13785 Worldwide - Version 24 - May 12, 2014
HP 12500 Switch Series
JF426A
Note:1, 2, 3,4
JF426A#B2B
JF426A #B2C
JF426A #B2E
Page 17
Advertisement
Table of Contents
