Using The Handset Telephone; Selecting The Language - GE 21880 User Manual

NEW It turns on when there is new Caller ID in the
standby.
It turns on when the Caller ID record is a new
record during CID call log list access
REP It turns on when the Caller ID record is a
repeated record during CID call log list access
CALL It indicates the number of new call in the CID
list in standby
It indicates the Caller ID record number in the
CID list during CID call log list access
UP / DOWN It turns on to indicate that the user can press
UP/DOWN key to select other selection items.

Using the Handset Telephone

Using the telephone
When the handset is inserted in the station charging unit, it starts
to charge automatically. To optimize the battery performance,
charge the handset battery for 14 hours before firstly use.
Note: This phone defaults to Tone Dialing. To change Pulse Dialing,
see chapter "Base Station Settings – Changing the Dialing Mode". If
you don't know which type of service you have, please check with
the local telephone company.

Selecting the Language

Ten different languages are available for selection for each handset.
In standby mode, press
language is displayed.
Press or to select the desired language.
Press "INT/OK" key to confirm the selection or press [ C ] to
abort.
Note: The following languages are available
ENGLISH; GERMAN;FRENCH; CZECH; TURKISH; POLISH;
button and "5" key. Current
:
– 15 –