Default Settings; Key Assignment Overview; Registering Additional Handsets - GE 21880 User Manual

Default Settings

If selected, the handset settings which you have changed are returned
to their default values. The phone book entries are retained.
Press key until the HANDSET menu appears. Press
"INT/OK" key.
Press or key to select the submenu 'Default' and press
"INT/OK" key to confirm.
Note: The display will switch back to standby mode.

Key assignment Overview

1 SPACE, 1
2 A, B, C, 2
3 D, E, F, 3
4 G, H, I, 4
5 J, K, L, 5
6 M, N, O, 6

Registering Additional Handsets

Further handset of the same model can be registered on one base
station.
Press key until the HANDSET menu appears and press
"INT/OK" key.
Press or key to select the submenu "REGISTER" and
press "INT/OK" key.
Handset display shows "SEARCHING".
Press and hold "page" key on the base station more than 4
seconds until "REGISTER" is displayed.
After a certain period of time (approx.10 seconds), enter the PIN
(default setting = 0000) and press "INT/OK" key.
Note: After the connection has been established, the name and
number of the handset (the next available handset number should
be 2) appear in the display.
The base will be ready for registration for 5 minutes when the page
7 P, Q, R, S, 7
8 T, U, V, 8
9 W, X, Y, Z, 9
0 +, -, 0
* [, ], *
# ?, :, #
– 25 –