Installing The Raid Driver (For Bootable Raid Array; Install Driver In Windows Xp / 2000 - MSI G52-72381X1 User Giude

(v1.x) mainboard
Table of Contents

Advertisement

M S-7238 M ainboard

Installing the RAID Driver (For bootable RAID array)

Install Driver in Windows XP / 2000

† New Windows XP / 2000 Installation
The following details the installation of the drivers while installing W indows XP /
2000.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if you
need to install third party SCSI or RAID driver" appears.
2. W hen the W indows XP/2000 Setup window is generated, press <S> key to
specify an Additional Device(s).
3. Insert the driver diskette JM icron RAID Driver into drive A: and press
<Enter>.
Important
The JMicron RAID Driver Installation Disk should be accompanied in the
mainboard package. You may make the Serial ATA RAID driver by yourself by
following the instruction below.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the "Browse CD" botton on the Setup Screen.
3. Copy all the contents in the \\IDE \ JM icron \ Floppy to a formatted
floppy disk.
4. The driver disk for JM icron RAID Controller is done.
4. Choose the driver JM icron JM B36X RAID Controller that appears on
W indows XP/2000 Setup screen, and press the <Enter> key.
5. Press <Enter> to continue with installation or if you need to specify any
additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.
6. From the W indows XP/2000 Setup screen, press the <Enter> key. Setup
will now load all device files and then continue the W indows XP/2000
installation.
† Installing OS on RAID Drive
1. After setup examines your disks, it will copy files to W indows installation
folders and restart the system.
2. The setup program will continue and finish the installation after restarting.
3. W ait until W indows XP/2000 finishes installing devices, regional settings,
networking settings, components, and final set of tasks, then reboot the
system if necessary.
† Confirming Windows XP/2000 Driver Installation
1. From W indows XP/2000, open the Control Panel from My Computer
followed by the System icon.
2. Choose the Hardware tab, then click the Device M anager tab.
3. Click the "+" in front of the SCSI and RAID Controllers hardware type.
The driver JM icron JM B36X RAID Controller should appear.
D-10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P965 platinum series

Table of Contents