Table of Contents
Advertisement
If HME is selected, do the following:
1.
Select HME_BLC SET.
2.
Set SET LEVEL to LOWEST, LOW, MID,
or HIGH.
3.
Define the highlight masking area
(shaded) by adjusting TOP, BOTTOM,
LEFT, and RIGHT.
4.
Define MASK 1 (indicated by the outline at
the top left of the screen) by adjusting
TOP, BOTTOM, LEFT, and RIGHT.
5.
Set up additional highlight masks if desired.
6.
Set MODE to ALL DAY or NIGHT.
7.
Select SET LEVEL to adjust the HME level. Select a value from 001 to 100.
The higher the number, the darker the mask.
If D.WDR is selected, do the following:
•
Select SET LEVEL and select a value from
0 to 20.
8
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
