Honeywell HD3DS Configuration Manual page 20

SETUP DPC SET
Note For advanced users only.
Dead Pixel Cancellation (DPC) automatically removes defective ("dead") pixels in real time.
Set DPC SET to AUTO or OFF.
If AUTO is selected, do the following:
1. Set WHITE THR. to cancel defective white
pixels. Select a value from 000 to 255. The
default setting is 150.
2. Set BLACK THR. to cancel defective black
pixels. Select a value from 000 to 255. The
default setting is 030.
3. Set DPC LEVEL to adjust the sensitivity
level of the dead pixel cancellation. Select a
value from 000 to 255. The default setting is
030.
Note Adjust the WHITE THR. or BLACK THR. and DPC LEVEL at the same time.
SETUP MONITOR
Set MONITOR to MODE 1 or MODE 2.
MODE 1 is the default setting. If the displayed image is unsatisfactory, try MODE 2.
20