Add The External Device; Using The Universal Remote Control; Registered External Device Management - Samsung LED 7500 series E-Manual

Add the External Device

11
Turn on the external device you wish to set up universal remote function for and then press
SOURCE
to bring up the
21
Universal remote setup
Select
setup process.
31
Follow the on-screen instructions for the Universal remote setup. If it does not respond properly,
set up the remote control by entering the model number manually.

Using the Universal Remote Control

By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.

Registered External Device Management

Universal remote setup
From the
available:
Source Setup
●
Change the TV's input connector that the external device is connected to.
Synced Power Off
●
Configure the external device to turn off when the TV is turned off.
Rename
●
Rename the registered external device (up to 15 characters long).
Delete
●
Delete the registered external device.
Source
screen.
from the top of the screen. This initiates the universal remote
screen, select a registered external device. The following options are