Advertisement
Technical description and operating instructions
Unpacking • Scope of delivery
Unpacking
Turn the flaps on the upper side of the box back-
wards, remove the styrofoam parts and carefully
take the loudspeaker out of the box. If necessary,
insert the enclosed grids into the front of the
loudspeaker.
We strongly recommend you not to dispose of
the boxes. If any reparation is needed in future,
the original packaging will protect your valuable
loudspeaker during transportation in the best
way. We cannot be held liable for damages resul-
ting from defective packaging.
The Motiv 10 set is delivered as a complete system
in two different configurations:
5.1 Concert Set · 5.1 Cinema Set
These sets consist of three different component
types in different numbers:
Scope of delivery
5.1 Concert Set:
1 x A 1000 SW subwoofer
4
5 x MO 10 FCR loudspeaker
4
1 x Mains cable for subwoofer
4
20 x Rubber pads
4
5 x Dowels
4
5 x Dowel screws
4
5.1 Cinema Set:
1 x A 1000 SW subwoofer
4
3 x MO 10 FCR loudspeakers
4
2 x MO 10 D loudspeakers
4
1 x Mains cable for subwoofer
4
2 x Wall brackets for MO 10 D
4
20 x Rubber pads
4
9 x Dowels
4
9 x Dowel screws
4
Accessories
Connection cable and stands are not included in
the set because of diverse requirements of cu-
stomers. However, you receive a suitable cable for
the loudspeaker, a subwoofer cable and stands
directly from us. You can find all accessories op-
tions for the Motiv 10 set on the following page.
Mains cable for
A 1000 SW subwoofer
Dowels and
dowel screws
Screws for
wall-mounting
First check the system for
completeness
Attention:
At least during the
eight weeks before the deadline
for returning, you should keep
the packaging box because
3A 1000 SW
ONLY if returned in the delivered
ORIGINAL PACKAGING the whole
purchase price can be
refunded!
3MO 10 FCR
3MO 10 D
Rubber pads for
loudspeakers
Wall brackets for the
MO 10 D
· Motiv 10
5
Advertisement
