Channel Level - Denon AVR-1513 Owner's Manual

ENGLISH ENGLISH FRANÇAIS DEUTSCH
Distance
(Cont.)
3
ui
Use to select a speaker, and use
o p
to select distance.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R
Select the speaker.
• 0.0ft – 60.0ft : Set the distance.
• The speakers that can be selected differ
depending on the "Speaker Confi g."
(vpage 5) settings.
• Default settings :
Front L / Front R / Center / Subwoofer : 12.0 ft
Surround L / Surround R : 10.0 ft
• Set the difference in the distance between the
speakers to less than 20 ft.
NOTE
Speakers set to "None" in "Speaker Confi g."
(vpage 5) are not displayed.
4
ENTER
Press to enter the setting.
Speaker Setup
Speaker Config. Step
Bass Setting Front L/R
Distance Center

Channel Level

Subwoofer
Crossover Freq. Surround L/R
7 7
FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO
Channel Level
1
ui
Use to select "Channel Level",
ENTER
and then press .
Speaker Setup
Speaker Config. Test Tone Start
Bass Setting Default
Distance
Channel Level
Crossover Freq.
ENTER Enter
1 Channel Level
Test Tone Start
Default
2
ENTER
Press .
Output test tone.
1 Channel Level
Front L 0.0dB
Center 0.0dB
Front R 0.0dB
Surround R 0.0dB
Surround L 0.0dB
Subwoofer 0.0dB
ENTER Enter
ESPAÑOL ESPAÑOL NEDERLANDS NEDERLANDS
3
ui
Use to select a speaker, and use
o p
to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround L / Subwoofer
Select the speaker.
• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.
• When o is pressed while the subwoofer volume
BACK Return
is set to "–12 dB", the "Subwoofer" setting
switches to "OFF".
• When "Channel Level" is adjusted, the adjusted
values are set for all the surround modes. To
adjust the channel level separately for the
different surround modes, use the operation
see vm page 25 "Adjusting the volume of
the speakers".
NOTE
• Speakers set to "None" in the "Speaker Confi g."
(vpage 5) settings are not displayed.
• When a headphones jack is inserted in the
PHONES jack of this unit, the "Channel Level"
is not displayed.
BACK Return
SVENSKA SVENSKA
Default settings are underlined.
4
ENTER
Press
Test Tone Start
Default
Default
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
5
BACK
Press
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
to enter the setting.
1 Channel Level
The "Channel Level" settings are
returned to the default settings.
.
Speaker Setup
Test Tone Start
Default