Table of Contents
Advertisement
c
ontents
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
1 - Hedge Clipper Assembly
1 - Operator's Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Blade Cover
a
ssembly
NOTE
For normal cutting, Echo strongly recommends the blade stiffener
be installed. In extreme conditions, such as commercial cutting,
or when cutting thick and/or dense branches, efficiency may be
increased by trimming without the blade stiffener.
Tools required:
8 mm Socket & Extension Wrench, 4mm Hex
Wrench w/Extension
Parts Required:
Blade Stiffener, Blade Lock Nuts, Washers
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
IMPORTANT
Follow blade bolt adjustment instructions exactly. Failure to do so
could result in damage to blades or gearbox.
H
C
edge
lipper
O
'
M
peratOr
s
anual
9
Advertisement
Table of Contents
