Install The Front Grill - KID Trax Dodge Charger Owner's Manual

Install the Front Grill

1. Remove the medium M5 x 30 screw which is attached to the front
end connector.
2. Align the connector over the square metal tubing on the car body.
Push the metal tubing together until the two pieces meet inside
the connector.
3. Insert the same screw that you removed in step one through
the hole in the front grill connector. Once inserted, fasten an M5
screw nut onto the end of the screw.
4. Using M4.2x20 screws, secure the front grill to the car body by
fastening the screws into the five screw hole locations on the car
body. Note: The orientation of the screws are not the same for
each hole location.
4
3
2
7