Install The Front Wheels - KID Trax KT1098TG User Manual

Install the Front Wheels

1. Slide large washer, onto the axle as shown.
2. Locate a wheel marked front. Slide the wheel onto the axle with the word front
facing in, toward the vehicle.
3. Align the five posts on the back of the wheel cover with the holes in the wheel
and slide the wheel cover into the wheel.
4. Slide a small washer and then the snap-pin onto the axle.
5. Align the locks in the hubcap with the holes in the wheel cover and press in
place.
Note: Do not use a hammer. Repeat steps 1-5 to attach both front wheels.
Large Washer
Front Wheel
Wheel Cover
Small Washer
Snap Pin
Hub Cap
5