Parking Brake; Transmission Drive System - Dixon ZTR 4000 series Operator's Manual

The Dixon ZTR has a unique transaxle that requires only two drive levers to control
braking, turning, speed, and direction.
On initial operation, set throttle speed on slow. Operate with mower blade "OFF".
To avoid "over-controlling" the mower, use a light touch on the drive levers.
Slight movements using fingertip control is all that is necessary.

PARKING BRAKE:

The parking brake is designed to hold the mower from moving and
is not intended for use in stopping the mower while it is in motion.
CAUTION
TO SET PARKING BRAKE:
The hand operated parking brake is located on the right fender.
To engage brake, pull lever up(to the rear).
To release brake, move lever forward (down).
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.

TRANSMISSION DRIVE SYSTEM

Allows the mower to turn on its own axis
Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.
Page 14
CONTROLS
Engage parking brake before restarting
starting engine.
"Zero Turning Radius"
: