Controls; Parking Brake; Transmission Drive System - Dixon 4500 ZTR Series Operator's Manual

PARKING BRAKE:

The parking brake is designed to hold the mower from
moving and is not intended for use in stopping the mower
while it is in motion. The engine will stop if the parking
brake is engaged while the control levers are in the drive
position.
CAUTION Engage parking brake before
TO SET PARKING BRAKE:
The hand operated parking brake is located on the right
fender.
To engage brake, pull lever up(to the rear).
To release brake, move lever forward (down).
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.

TRANSMISSION DRIVE SYSTEM:

Allows the mower to turn on its own axis
Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very
light.

CONTROLS

starting engine.
"Zero Turning Radius"
Page 13