Troubleshooting Guide - Honeywell CO48PM Owner's Manual

PROBLEM
No discharge of air
Not Cooling / Unit is
making noise
Odors
Customer Support: 1-800-474-2147
POSSIBLE CAUSE
Cord is not plugged in.
Power is not on.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or Calcium
deposits on blower.
When the Cooler is new.
If the Cooler has been used.

TROUBLESHOOTING GUIDE

SOLUTION
Make sure power cord is
plugged in and the supply
switch is on.
Turn the unit ON by pressing
button on the control panel.
On Control Panel, turn COOL
FUNCTION to "ON".
Refill water tank.
Contact service center.
When the unit is used for the
first time, the Honeycomb
Cooling Media will have an
odor, which will dissipate
within a few hours of initial use.
There may be an algae issue.
Replace the Honeycomb Cooling
Media.
15