Advertisement
troubleshooting your jbl on stage micro II
Technical Specifications
Frequency Response:
70Hz - 20kHz
Power Consumption:
lOW Maximum
Power Input:
6V/l.SA
JBL On Stage Micro II Transducer:
(2) 1" Full range per channel
Dimensions:
Diameter - 6" (lSOmm)
Height - 1-3/4" (38mm)
System Weight:
0.67 Ib (0.30kg)
Battery:
OSMII Size - AAA (4 pes.)
Type - Alkaline, NiMh
Remote Control Size - CR202S (1 pc)
Type - Lithium
DO NOT MIX BATTERYTYPES.
DO NOT MIX CHARGED AND PARTIALLY
CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE WHILE IN
JBL ON STAGE MICRO II.
CAUTION: RISK OF EXPLOSION OF BAT-
TERY IF REPLACED WITH AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
No sound from the JBL
On Stage Micro II speaker
system
No power to the system or power
supply is not inserted correctly
The volume may be set too low
Issue with auxiliary audio source
Issue with iPhone/iPod source
Low or drained batteries
Ensure that the power supply is connected to a live power
source and properly connected to the JBL On Stage Micro II.
Note: When the JBL On Stage Micro lIis powered, a green
power LED on the top of the system will illuminate.
Touch the volume "Up"
(+)
button to increase system
volume level. Note: See the Easy Setup guides for an
overview of volume and other system functions.
Make sure an auxiliary cable is properly connected to
a known reliable source. Test the audio source with
headphones. Turn up the volume of the source.
Make sure that the iPhone/iPod is properly docked. Make
sure iPhone/iPod is not paused; press the Play button on
the iPhone/iPod or remote control. Try connecting your
iPhone/iPod from it's heap hone jack.
Replace the batteries. The green power LED will change
to red when batteries need to be replaced.
If you have any questions or need further assistance, please visit www.jbl.com.
These specifications are subject to change without notice.
6
Advertisement
