A grounding-type plug 18. Do not expose batteries to excessive heat such as Changes or modifications not expressly approved by JBL could void the user’s authority to operate the equipment. has two blades and a third grounding prong. The wide sunshine, fire or the like.
Page 3
Unpacking Getting to know your jbl on stage III Carefully unpack your JBL On Stage ® III WM and identify all its components: 1. JBL On Stage III WM 2. Attachments 12VDC In Audio In Adapters for “Walkman” 4. IR (infrared) remote control 3.
Page 4
JBL On Stage III (+) to increase and (–) to decrease. nect an audio cable (not included) to the rear of the JBL On Stage III WM, WM. A green LED will light when Press both to mute the JBL On and connect the other end of the audio cable to the audio source.
Increase volume: Press the Volume Up button. 2. In the wall adapter power supply mode, the JBL On Stage III WM will go Decrease volume: Press the Volume Down button. into standby mode if no audio signal is detected for 10 minutes. Once an Mute: Press the Mute/Unmute button.
JBL On Stage III WM. system Note: When the JBL On Stage III WM is powered, a green Power Consumption: 20W Maximum power LED on the top of the system will illuminate.
Connect the JBL On Stage III WM to an audio source that you knowto be good. To ensure that the source is good, test the audio source with head- phones.
Page 8
JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. The trademark On Stage is used with permission of OSA International, Inc. “Walkman” and the “Walkman” logo are trademarks or registered trademarks of Sony Corporation.