Service The Parksense® Park Assist System; Cleaning The Parksense® System; Parksense® System Usage Precautions - Chrysler 200 Convertible 2014 User Manual

262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Service The ParkSense® Park Assist System
During vehicle start up, when the ParkSense® Park
Assist system has detected a fault condition, the Elec-
tronic Vehicle Information Center (EVIC) will actuate a
single chime, once per ignition cycle, and it will display
the "CLEAN PARK ASSIST", "SERVICE PARK ASSIST"
or the "SERVICE PARK ASSIST SYSTEM" message. Refer
to "Electronic Vehicle Information Center (EVIC)" in
"Understanding Your Instrument Panel" for further in-
formation. When the shift lever is moved to REVERSE
and the system has detected a fault condition, the EVIC
will display the CLEAN PARK ASSIST , SERVICE
PARK ASSIST , or SERVICE PARK ASSIST SYSTEM
message for as long as the vehicle is in REVERSE. Under
this condition, ParkSense® will not operate.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.
ParkSense® System Usage Precautions
NOTE:
• Ensure that the front and rear bumper are free of snow,
ice, mud, dirt and debris to keep the ParkSense®
system operating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense®.
• When you turn ParkSense® off, the EVIC will display
"PARK ASSIST SYSTEM OFF." Furthermore, once you
turn ParkSense® off, it remains off until you turn it on
again, even if you cycle the ignition key.