Modes Of Operation - Chrysler 200 Convertible 2014 User Manual

124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Modes Of Operation

Modes Of Operation With EVIC
Three selectable modes of operation are available in the
Electronic Vehicle Information Center (EVIC). Refer to
"Electronic Vehicle Information Center (EVIC)/Personal
Settings (Customer-Programmable Features)" in "Under-
standing Your Instrument Panel" for further information.
Modes Of Operation With Uconnect® System —
If Equipped
Three selectable modes of operation are available in
the Uconnect® system screen. Refer to "Customer-
Programmable Features — Uconnect® Access settings "
in "Understanding Your Instrument Panel" for further
information.
Blind Spot Alert Lights Only
When operating in Blind Spot Alert mode, the BSM
system will provide a visual alert in the appropriate side
view mirror based on a detected object. However, when
the system is operating in RCP, the system will respond
with both visual and audible alerts when a detected
object is present. Whenever an audible alert is requested,
the radio volume is reduced.
Blind Spot Alert Lights/Chime
When operating in Blind Spot Alert Lights/Chime mode,
the BSM system will provide a visual alert in the appro-
priate side view mirror based on a detected object. If the
turn signal is then activated, and it corresponds to an
alert present on that side of the vehicle, an audible chime
will also be sounded. Whenever a turn signal and de-
tected object are present on the same side at the same
time, both the visual and audio alerts will be issued. In
addition to the audible alert the radio (if on) volume will
be reduced.