Front Park Assist Audible Alerts; Enabling And Disabling Parksense; Service The Parksense® Park Assist System - Chrysler 300 2014 Owner's Manual

260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Front Park Assist Audible Alerts

ParkSense® will turn off the Front Park Assist audible
alert (chime) after approximately 3 seconds when an
obstacle has been detected, the vehicle is stationary, and
brake pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be selected
from the Uconnect® System.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state
through ignition cycles.
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled using the
Uconnect® System. The available choices are: Off, Sound
Only, or Sound and Display. Refer to "Uconnect® Set-
tings" in "Understanding Your Instrument Panel" for
further information.
When the ParkSense® soft-key is pressed to disable the
system, the EVIC will display the "PARK ASSIST SYS-
TEM OFF" message for approximately five seconds.
Refer to "Electronic Vehicle Information Center (EVIC)"
in "Understanding Your Instrument Panel" for further
information. When the shift lever is moved to REVERSE
position and ParkSense® is turned off, the instrument
cluster will display "PARK ASSIST OFF" message for as
long as the vehicle is in REVERSE.
Service The ParkSense® Park Assist System
During vehicle start up, when the ParkSense® Park
Assist system has detected a fault condition, the Elec-
tronic Vehicle Information Center (EVIC) will actuate a
single chime, once per ignition cycle, and it will display
the "CLEAN PARK ASSIST", "SERVICE PARK ASSIST"