To ensure your personal safety and to maximize the full operating potential of your drive,
read and follow the precautions listed below.
This section discusses installation concerns and drive maintenance.
Environment – Avoid installing this drive in a location with exposure to large
quantities of dust, high temperatures, high humidity, or subject to excessive
vibrations or shocks.
Power – Turn OFF the system before installing this or any other hardware
Read & Retain Instructions – Read all operating and user information provided
with this drive.
Cleaning – Use a damp cloth to clean the exterior housing. Avoid using any
fluids including liquid, aerosol or alcohol-based cleaning products.
Water or Moisture – Avoid operating or locating this drive near water or other
sources of fluid.
Power Sources – Operate this drive only from the recommended power
sources. If you are unsure of the power source, consult an authorized Pioneer
Overloading – Avoid connecting too many devices to a single wall socket or
power source as this can cause fires or short circuits.
Object & Liquid Entry – Never push inappropriate objects in to the device.
Avoid spilling any liquids in to or on the outside of the drive.
Condensation – Moisture can form in the operating section of the product if the
drive is taken from cool surroundings to a room with a warmer temperature. Let
the drive stand for one to two hours in the new location before turning it ON.
Servicing – Opening or removing the cover exposes you to possible electrical
shock or other danger. Contact a Pioneer authorized service representative for
repairing this drive (refer to the enclosed Service & Support Card).
DVR-A04/ DVR-104 Operating Instructions
- 3 -