Safety Instructions - Pioneer BDR-XD07S Operating Instructions Manual

Slim portable usb 3.0 bd/dvd/cd writer
Table of Contents

Advertisement

Available languages

Available languages

Safety instructions

To ensure your personal safety and to maximize the full operating potential of your unit, read and follow
these safety instructions.
Read & Retain Instructions – Read all operating and user information provided with this drive.
Cleaning – Use a damp cloth to clean the exterior housing. Avoid using any fluids including liquid,
aerosol or alcohol-based cleaning products.
Water or Moisture – Avoid operating or locating this drive near water or other sources of fluid.
Accessories – Do not place this product on an unstable cart, stand, or table. The product may fall and
be seriously damaged.
Ventilation – Slots and openings in the chassis are for cooling and proper operation of the unit. Do NOT
block or cover the openings. Do NOT place this unit on a bed, rug, etc. as this can block the openings.
This unit should not be placed in a built-in installation unless properly ventilated.
Operation – Avoid moving, lifting or reorienting this drive while a disc is rotating inside.
Environment – Avoid installing this drive in a location with exposure to large quantities of dust, high
temperatures, high humidity, or subject to excessive vibrations or shocks.
Power Sources – Operate this drive only from the recommended power sources. If you are unsure of the
power source, consult an authorized Pioneer representative.
Power-Cord Protection – When unplugging the unit, pull on the plug – not on the cord. Do not handle
the cord or plug with wet hands; doing so could cause an electric short or shock. Do not allow anything
to pinch or rest on the power cord and do not place in a walkway.
Object & Liquid Entry – Never push inappropriate objects into the device. Avoid spilling any liquids into
or on the outside of the drive.
Condensation – Moisture can form in the operating section of the product if the drive is taken from cool
surroundings to a room with a warmer temperature. Let the drive stand for one to two hours in the new
location before turning it ON.
Servicing – Opening or removing the cover exposes you to possible electrical shock or other danger.
Contact a Pioneer authorized service representative for repairing this drive (refer to the enclosed Service
& Support Card).
5
En

Advertisement

Table of Contents
loading

Table of Contents