Repair And Calibration Services; Warranty - Extech Instruments 160310 Instruction Manual

3.7.1 To set the check limit value:
1. Press the CHECK key.
2. Key in the number of pieces you wish to set as the check limit value. This value will be
blinking in the UNIT WEIGHT display window.
3. Press the SET key. The display now shows the information in the following format:
The UNIT WEIGHT display window shows the number entered for check limit.
4. Press the CHECK key again to return to previous operation.
3.7.2 To use the check limit function:
1. Enter the Unit Weight of the objects you wish to count by one of the methods listed
under "Piece Counting Operation."
2. Add pieces to the container until the scale "beeps" repeatedly and the value in the
PIECES display window blinks on and off.
3.7.3 To clear the check limit value:
1. Press the CHECK key.
2. Press the CE key. The value in the UNIT WEIGHT display window becomes zero.
3. Press the SET key to clear the value from memory.
4. Press the CHECK key to return to previous operation.

4. Repair and Calibration Services

Extech offers complete repair and calibration services for all of the products we sell. For periodic
calibration, NIST certification or repair of any Extech product, call customer service for details on
services available. Extech recommends that calibration be performed on an annual basis to
insure calibration integrity.

5. Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for
one year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become
necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service
Department at (781) 890-7440 for authorization. A Return Authorization (RA) number must be issued before any
product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging
to prevent damage in transit.
This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation
outside of specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any
implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, indirect,
incidental or consequential damages. Extech's total liability is limited to repair or replacement of the product.
The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied.
Copyright © 1999 Extech Instruments Corporation. All rights reserved including the right of
reproduction in whole or in part in any form.