Brother XR9500PRW Operation Manual page 73

e Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
1
a Bobbin case
f Use the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.
a Cleaning brush
b Race
• Do not put oil on the bobbin case.
g Insert the bobbin case so that the
the bobbin case aligns with the
race.
• Align the and
a mark
b mark
• Make sure that the indicated points are
aligned before installing the bobbin case.
mark on
mark on the
marks.
h Put the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
CAUTION
● Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.
● Make sure that you fit the bobbin case
properly, otherwise the needle may break.
Meijer.com
4
71