The delay is expressed in meters. The delay resolution is 0.1 up to 10 meters and 1 from 10 to 20
meters.
To set the system time delay push the delay encoder and rotate it until the wanted setting is displayed.
Push the encoder again to confirm the setting.
CARDIOID SET-UP
It is possible to create subwoofer cardioid systems using groups of three modules.
A group is made of three modules, the group shall be made as follow:
-
2 modules pointing in forward direction, cardioid switch released
-
1 module pointing in backward direction, cardioid switch pressed
all 3 modules shall have the same settings (system delay, sensitivity, x-low cut, x-over,...).
-
RDNet CONNECTION