Kenwood DDX771 Instruction Manual page 24

HD Radio™ tuner HD Radio™ tuner
Changing the display information
The preset list containing the station names is
displayed.
• Pressing [TEXT] again to display the text
information for the station currently being
received.
24
Selecting a station/channel directly
1
2
Select frequency ([FREQ]) or channel
([CH]) to select (1), enter the frequency or
the channel number (2), then confirm the
entry (3).
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes to digital or analog audio automatically
according to the receiving condition.
1
2
[Auto] Switch between digital and analog
audio automatically.
[Digital] Select this to tune to digital audio
only.
[Analog] Select this to tune to analog audio
only.
Activating/deactivating TI Standby
Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator goes off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.