Canon CP-300 User Manual page 36

Problem
Cause
Solution
The printer's indicator lights red
without the camera's LCD
monitor displaying any error
message.
There is a malfunction in the
printer.
Remove the paper from the
I
paper-handling slot and take up
any slack in the ink sheet. Turn
I
the
pri~ter's
power off and turn it
,on agam.
II
Use the designated paper type.
Printed images are distorted.
Print quality is not good. You are not using the correct
I
paper type_.
+--
----I
Paper is loaded with the wrong Load the paper correctly (glossy
1.~id~~
__+s-i-de-U-p-)-.
----1
I
The ink sheet or paper is dirty. Use a clean ink sheet and clean
paper.
I
Condensation has formed inside
W-a-itf-or-co-n-de-n-sa-tio~to--
the pri nter. evaporate,
Faint stripes appea-r-in-t-he-pr-in-t-.
-I~has accumul~ted
inside the
R-em-o-v~-th-ei~kc~-ss~e-tt-e
a-nel-
l
'
printer. insert the cleaner stick in the
I
direction of the arrow and with
I
the arrow on the cleaner stick
Ifacin g up.
I
',Push it in completely as shown in
I
,
figure
A
and slide it in and out of
I
I
the printer 2 or 3 times.
I
'The printer is too close to a TV,
I
Move the printer so that it is at
video game machine, or other
!
least one meter (3.3 ft.) away
electromagnetic source.
I
from the
electroma~neti~urce.
The printer is too close to a stereo
I
Move the printer away from the
speaker, large motor, or other
!
strong magnetic source.
_____________+s-t-ro-n-
Q
-m-a-
Q
-n-8t-ic
_~~rce.
,-.---+I---------,------l
Nothing happens when the The printer has overheated. 'Wait for the printer to cool down.
camera's SET button is pressed.
Printing is i~-p-r~gress.
W-a-it-for the printer to finish
printing.
Paper is creased or curled.
Frequent paper jams.
The paper cassette is overloaded. Do not load more than 18 sheets
of paper into the cassette.
- - - - - - - - - - t - - - -
The print output receptacle is too Do not allow more than 9 sheets
full. to accumulate in the receptacle.
Do not use paper that is creased
'or curled.
Figure
A
35