Cradlepoint IBR600 User Manual page 122

COR | USER MANUAL Firmware ver. 4.2.0
CRADLEPOINT
Network-Initiated Schedule: When you select "On Schedule" for Network-Initiated Alerts, you also select a time from
this dropdown list. Modem updates will take place at this scheduled time.
Modem Connection Mode: Specify how the modem should connect to the network. Not all options are available for all
modems; this will default to Auto if an incompatible mode is selected.
• Auto (all modes): Let the modem decide which network to use.
• Auto 3G (3G or less): Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE.
• Force LTE: Connect to LTE only and do not attempt to connect to 3G or WiMAX.
• Force 3G (EVDO, UMTS, HSPA): Connect to 3G network only.
• Force 2G (1xRTT, EDGE, GPRS): Connect to 2G network only.
AT Dial Script: This is included for legacy devices only. Most users will not use this option. Go to SIM/APN Settings
instead if you need to select a specific Access Point Name.
If you do need this option for older devices, enter the AT commands to be used in establishing a network connection.
Each command must be entered on a separate line. All command responses must include "OK" except the final command
response, which must include "CONNECT".
Example:
AT
ATDT*99***2#
PPP Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option
chooses the wrong one.
• Auto
• PAP (Password Authentication Protocol)
• CHAP (Challenge Handshake Authentication Protocol)
PPP Username: Username for PPP authentication.
PPP Password: Password for PPP authentication.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 120