Conigure Wpa/Wpa2 Passphrase; Using The D-Link Wireless Connection Manager - D-Link DWL-G122 User Manual

Section 4 - Wireless Security

Using the D-Link Wireless Connection Manager

It is recommended to enable WPA-PSK on your wireless router or access point before coniguring your wireless adapter.
If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.
1. Open the Wireless Connection Manager by double-clicking on
the D-Link icon on your desktop.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect. If the network is using WPA-PSK, the
screen (as shown to the bottom-right) will appear.
3. Enter the WPA-PSK passphrase exactly as it is on your
wireless router or access point. Click the Show text in the
password ield box to see the passphrase. Unchecking it will
hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to connect.
If you would like to create a new network and enter the WPA-PSK
settings, refer to the next page.
D-Link DWL-G122 User Manual
Configure WPA/WPA2 Passphrase
32