Netis DL4311 User Manual page 45

ADSL2+ Modem Router User Manual
First, push the button of WPS on this Modem Router, release it. Then turn to your wireless
network adapter, push the WPS button and release it. Wait a moment, the WPS will become
flashing then finally get solid on if the connection is successful.
Note:
1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or WPA/WPA2-PSK mode is
configured.
2) To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
WPS progress: Idle or In progress, shows the progress of WPS
Authentication Type: Select an authentication type from the drop-down list, which allows you to
configure security features of the wireless LAN interface. Options available are: Disabled,
WEP-64Bits, WEP-128Bits, WPA-PSK, and WPA2-PSK.
Ⅰ. WEP-64 Bits:
To configure WEP-64Bits settings, select the WEP-64Bits option from the drop-down list. The menu
will change to offer the appropriate settings. WPA-64Bits is a data privacy mechanism based on a
64-bit shared key algorithm, as described in the IEEE 802.11g standard.
Ⅱ.
WEP-128 Bits
Select WEP-128 Bits, the menu will change to offer the appropriate settings. 128-bit is stronger
than 64-bit.
Ⅲ. WPA-PSK
To configure WPA-PSK settings, select the WPA-PSK option from the drop-down list. The menu will
change to offer the appropriate settings. WPA-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
Ⅳ. WPA2-PSK
To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu
will change to offer the appropriate settings. WPA2-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
Encryption: Select the encryption you want to use: Automatic, TKIP or AES (AES is an encryption
method stronger than TKIP).
• TKIP (Temporal Key Integrity Protocol): A wireless encryption protocol that provides dynamic
40