Brake/Transmission Interlock Manual Override - Jeep Liberty 2010 User Manual

BRAKE/TRANSMISSION
INTERLOCK MANUAL
OVERRIDE
• The manual override may be used in
the event that the shift lever should fail
to move from PARK with the Key Fob in
the ON/RUN position and the brake
pedal pressed.
• To operate the shift lock manual
override, perform the following steps:
• Turn the Key Fob to the ON/RUN
position but do not start the engine.
• Firmly set the parking brake.
• Using a flat-bladed screwdriver,
carefully remove the shift lock
manual override cover which is
located on the PRNDL bezel.
• Press and maintain firm pressure
on the brake pedal.
• Using a screwdriver, reach into the
manual override opening. Press and
hold the shift lock lever down.
• Move the shift lever into the
NEUTRAL position and start the
vehicle.
• Release the parking brake.
• Have your vehicle inspected by your
local authorized dealer immediately if
the shift lock manual override has been
used.
43
UTILITY