XFX GeForce 8300 (MI-A78U-8309) User Manual page 23

XFX Motherboard Series
► ACPI Confi guration
These options allow you to manage General/Advanced/Chipset ACPI Confi guration, for the
Gerneral ACPI Advanced Confi guration, Suspend mode there are three mode for selection,
S1(POS), S3(STR),and AUTO, the function explains to following:
S1(POS): Enables the system to enter the ACPI S1(Power on Suspend)sleep state(default),
In S1 sleep state, the system appears suspended any stays in a low power mode. The system
can be resumed at any time.
S3(STR):Ehables the system to enter the ACPI S3(Suspend to RAM)sleep state. In S3 sleep
state. When signaled by a wake-up device or event, the system resumes to its working state
exactly where it was left off.
► APM Confi guration
Click <Press Enter> key to enter its submenu, APM Confi guration Template Manager allows
you to manage Power Managerment default or custom confi guration templates.
► PC Health
Click <Press Enter> key to enter its submenu, it will be display hardware health
confi guration, including System temperature, CPU temperature, FAN speed and all kinds
of voltages.
4.5.7 JUSTw00t! Setting(OverClock Settings)
Main Advanced
Over Voltage and Clock Setting
Frequency/Voltage Control
LAN1 BootROM Control
► Memory Con guration
CPU Voltage Control
DRAM Voltage Control
Chipset Voltage Control
Memory 2T Mode
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
iGPU Spread Spectrum
► Hyper Transport Con guration
CPU Frequency,MHz
These options allow you to manage LAN BootRom Contor, CPU Voltage Control, Dram
Voltage,Chipset Voltage Contorl, Memory Mode, and so on. .
And the option of CPU Frequency,MHz allows you overclock CPU clock, the Min is 200MHz,
the Max is 400, per keyin "+"/"-" to select clock.
BIOS SETUP UTILITY
Security
Boot
[Disabled]
[Auto]
[Auto]
[Auto]
[2T Mode]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[200]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Power
JUSTw00t!
To Enable/Disable
Onboard PCIE LAN BootR
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
- 23 -
User Guide
Exit
Select Screen
Select Item