Selecting A Group; Favourite Position; Driving A Group - Telis Composio RTS User Manual

Selecting a group
There are two different ways to select a group.
Selecting a group by name
Place the cursor on the group names at the bottom of the screen and use the
(~
the group names until the desired group is found.
.) keys to scroll
The names that appear in this field are the names of the last groups .....- - - - - ­
used. You can choose to display the last five groups used, the last ten
System
On~~Off
groups used or all groups. This setting can be modified from the
"System> Settings> Size gl'"oup list"
menu (refer to
"Settings").
~
Shutter •
• Setting up this function so that it only displays the last fiyegroups used makes it
possible to run a q,uic~~.e.~r:.~.on the most used groups. '.~ ..... _,.".
Selecting a group from the matrix
Select the desired group directly from the matrix using the
(~:.)
keys.
The black boxes correspond to groups that have already been
created; the blanl< boxes correspond to blank locations.
The corresponding group name is displayed at the bottom of the
screen.
Driving a group
SY5h:m 007!E-Off
Shutter
After first selecting a group, all of the products in the group can be driven simultaneously:
Stop a
Up order Down order moving group
Lt\
Garage door and gote opening and closing systems are driven In sequential mode using the (e) key: every
, time you press the (e) key, the drive motor successively receives the up I stop I down I up I stop orders...
.. Garage door and gate opening ond closing systems must not therefore be included In groups comprising other
kinds of produd5 that use
0
conventional drive mode. A group should be created for each garage door
or
gate opening
and closing system. Garage doors and gates must always be operated when
In
sight of the user.
6
Favourite position
An intermediate "favourite position (e)", that is not the up or down position, can be
:1
i
defined for each of the following prodUct types:
I
'I
•
•
•
•
•
Roller Blinds Venetian blinds tights
(terrace awning (Indoor or Garage doors (With a suitable
shutters and gat
or roller blinds) outdoor) es radio receiver)
I
Examples:
• For the roller shutter on a bedroom window, the favourite position may not correspond to
fully closed ,instead it may be so that light can be seen between the laths.
• For the roller shutters on the living room windows, the favourite position may be the one
that casts a shadow on a particular point in the room (lV screen, plant, rug, etc.).
• For the terrace awning, the position that puts the door or window in the shade.
Use
[I"'"
¢
Once a group of products has been stopped, whatever their
position, pressing the (e) key will move all ofthe selected group
~:':):.
products to their respective favourite positions. .
Lt\
We recommend saVing, modifYing or deleting favourite positions individually for eoch product:
, • using TeUs Composlo Iffi for groups comprising a single prodUct.
.. • using the product's lorol control point.
Saving or modifying the favourite position
Move the product to the desired position.
=
To save the position, press the (e) key until the product confirms
'I
that it has stored the favourite position with a brief move (for
approximately five seconds).
The favourite position is saved.
Deleting the favourite position :'f:t,y 5 s
Press the (e) I<ey when the product is stopped so that it will find its favourite
~ ' . ' "
position.
~f~
Once the product is in its favourite position, press the (e) key until the product confirms that
it has deleted the favourite position with a brief movement (for approXimately five seconds).
View the animated instructions for use and print off these instructions from the web site at:
www.mysomfy·com