Table of Contents
Advertisement
1- Press the (Prog.) key on the local control corresponding to the
prod uct to be added or deleted until brief prod uct motion is
observed (or blinking for a light receiver): then you have two
minutes left to perform the next step.
Modifying a group
To add a product to agroup or delete one, select "Modify group" and
confirm with (0) or (ok).
mm11a~
From the matrix, select the group to modify and confirm with (0)
or (ok).
The group modification procedure is performed as follows:
Local Control Options
.---
A ' -
---,
,
,
\
,
\
Ilr.;;~~\
\
,
\
\
\
\
\
\
\
\
2- Press the (Prog.) key on the Telis Composio RTS remote control
for 0.5 seconds. The corresponding product is again activated (a
brief movement or blinking) confirming the
procedure.
3- Finish the procedure by pressing (ok).
4- Test pairing using the
(6, 9
@) keys.
r
The product should react if it has been added or no longer react if
it has been deleted from the group. If not, repeat steps 1 and 2.
5- Finish with (ok) to validate.
follow the
Ins
Prog. Key
procedure
'!I!J
ModifygrQuP:
' . "
••>.....
~.~::~_:
.......
~".'~_
•. __
....;n.~;;;~~.
Use the UP/DOWN
keys to check your
action
Deleting a group
~~I!J~~Er~ili~
..
ru
delete agroup, select
"Oelete gr-oup"
and confirm with
(0)
llr(ok).
110111
the matrix, select the group to be deleted and confirm with
~ImImE
( • ) or (ok).
iii
o
lete all products from the group as follows:
.&.
All of the products
in
the group must be deleted individually, one after another.
Press the (Prog.) key on the local control corresponding to the
product to be deleted until brief product motion is observed (or
llllnl<ing for a light receiver): then you have two minutes left to
L -
---.J
Ilcrform the next step.
Local Control Options
r----------''''-'------------,
,
\
\
\
\
\
\
\
,
\
\
\
\
\
\
\
\
)
the (Prog.) key on the Telis Composio RTS remote control for
o.
J
5"
onds. The corresponding product is again activated (a
hrll I' movement or blinl<ing) confirming the end of the proce
(IIIF('.
/I '(J
'at
t
'P
1
and
2,
if
necessory, for all af the products to be deleted for the
IJroup CUrrently being modified.
- Delete all of the group products before finishing the procedure by pressing
(ok).
Ii-
Test pairing using the
(6, 9,
@) keys.
;"1:" ~~!::,~r~,~I.LIl
None of the prodUCts should react any longer. Repeat steps 1 and
Use the UP/DOWN
2
If necessary and re-test pairing until all of the products in the
keys to check 'lour
[lfOUp have indeed been deleted.
action
Finish with (ok) to validate.
follow the RTS
Prog. Key
procedure
I -
t
The deleted group's box becomes blank once again .
• Repeat the procedure from the start
('System> Gr-oups > Pair-ing > Modify
gr-oup
/I
menu) as many times os there ore modificotions to make.
Only confirm with
(ok)
when none of the products react any more.
14
15
end of the
Advertisement
Table of Contents
