Fitting/Replacing Batteries; Attaching The Wall Mount - Telis Composio RTS User Manual

Table of Contents

Advertisement

CHARACTERISTICS
Presentation
Telis Composio RTS is a remote control that lets you drive up to 20 groups of products
compatible with Somfy (RTS) radio technology.
The following product categories can be controlled by the Telis Composio RTS remote control:
· roller shutters,
· terrace awnings
• blinds (roller or pleated),
• venetian blinds (interior or exterior),
• garage doors and gates,
• lights (with a suitable radio receiver).
Techn ica Ispecifications
Dimensions
I
Operating
Protection
Radio range
temperature
level
E
E
.3
::;
~
/~
"' "
(",.,
~'
;'0 °C (ll OF)
j~
~
433.42 MHz
Hm
~
.. SSmm ..
+26 mm+
+29 mm+
0-60
0
C
Indoor use
Twe nly melers lh rough
two concrete walls
smlN6 I14TO SERVICE
Fitting/replacing batteries
Open the battery com partment cover. Insert three brand new
type AAA (lR03) 1.5 Valkaline batteries from the same source
and with the same expiry date.
Be sure to comply with the polarity indications shown on the
remote control.
Never use rechargeable batteries.
A low battery condition is shown on the display by the (D)
symbol.
All programmed settings remain in memory when the batteries are replaced or ifthey become
completely discharged.
If the remote control is not to be used for an extended period, we recommend removing the
batteries.
Used batteries should always be recycled and never disposed of with regular waste
g.
Setting into selVice for the first time
When first used the Telis Composio RTS automatically prompts the
user to set the language and create the first groups:
1- Select the language using the
(~
l)
keys and confirm with (ok).
2- Start to create the groups (refer to
"Cl"eating a gI"OUprr).
Modify group
•To create groups later, return to the main screen by pressing (
C) as
Delete group
many times as necessary.
Attaching the wall mount
Choosing a location for the wall mount
Choose an accessible location where it is easy to see and use the
remote control.
Attach the wall mount to the wall using the two screws supplied.
Attach it at a convenient height for reading the display.

Advertisement

Table of Contents
loading

Table of Contents