Washer Fluid - Chevrolet 2011 Corvette Owner's Manual

2011 chevrolet corvette
Hide thumbs Also See for 2011 Corvette:
Table of Contents

Advertisement

What to Use
To determine what kind of fluid to
use, see Recommended Fluids and
Lubricants on page 11 6. Always
use the proper fluid.
Notice: Use of the incorrect fluid
may damage the vehicle and the
damages may not be covered by
the vehicle's warranty. Always
use the correct fluid listed in
Recommended Fluids and
Lubricants on page 11 6.

Washer Fluid

What to Use
When the vehicle needs windshield
washer fluid, be sure to read the
manufacturer's instructions before
use. If the vehicle will be operating
in an area where the temperature
may fall below freezing, use a fluid
that has sufficient protection against
freezing.
Adding Washer Fluid
Open the cap with the washer
symbol on it. Add washer fluid
until the tank is full. See Engine
Compartment Overview on
page 10 10 for reservoir location.
Notice:
When using concentrated
washer fluid, follow the
manufacturer's instructions
for adding water.
Vehicle Care
Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
to freeze and damage the
washer fluid tank and other
parts of the washer system.
Also, water does not clean
as well as washer fluid.
Fill the washer fluid tank
only three-quarters full
when it is very cold. This
allows for fluid expansion
if freezing occurs, which
could damage the tank if
it is completely full.
Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
10-37

Advertisement

Table of Contents
loading

Table of Contents