Avocent ACS V6000 User Manual page 49

ACS v6000 Installation/Administration/User Guide
44
Command
-i6
-u <name>
-e <[^]char>
-l
-ro
<portname>
-t
To add access to serial ports for a user group:
1. Click Users - Authorization - Groups.
2. Click the new user group name.
3. In the Side Navigation Bar, click Access Rights.
4. In the content area, click Add.
5. Move serial target devices from the Available Target box on the left to the box on the right
by double-clicking on the serial target name, or by selecting the target and clicking the
Add button. You can remove any targets from the box on the right by double-clicking on
the target or by selecting the target and clicking the Remove button.
6. Select the desired access rights.
7. Click Save. The Serial screen will appear and show the serial target devices you have
authorized for use by the user group with configured permission(s).
8. Edit the access rights by selecting the checkbox next to one or more of the target names in
the list as needed and click Edit. The Target Access Rights screen is displayed with the
access rights. Select the desired access rights and click Save.
To assign appliance access rights for custom user groups:
1. Click Users - Authorization - Groups.
2. Click the new user group name.
3. In the Side Navigation Bar, click Access Rights - Appliance.
4. Select the desired appliance access rights and click Save.
Description
Displays local IPv6 assigned to the serial port
Username to be used in the target session
Escape character used to close the target session. Default
Ctrl-X
value:
Sorted lists ports and exit
Read-Only mode
Connect directly to a serial port
Idle time-out in seconds to choose the target