Suspension; Bracket Iii; Screw M4X8 - Panasonic FV-05VFL2 Installation Instructions Manual

1. Before installation, secure the fan body to adaptor
by using thumb screw.(Fig.1)
Connection method for 3 inches adaptor connector
2
1
3 inches adaptor connector
IMPORTANT:
Remove the tape from damper and adaptor
before installation. As show below:
Adaptor
2. Insert the supension bracket into the fan body and
adaptor. (select the suspension bracket as show below)
Spacing A on center Joists Insert Suspension bracket
12 inches
16 inches
19.2 inches vertical joists
24 inches
If spacing A on center joists is 24 inches, connect
suspension bracket
as show below :
Suspension bracket III
Duct tape
3
Damper
Remove the tape
A
Joists
Refer to Fig. 2-1
Refer to Fig. 2-2
Refer to Fig. 2-3
Refer to Fig. 2-4
II III
and (C4 mark to C4 mark)
I
Screw (M4X8)
Suspension bracket II
Thumb screw
Fan body

Suspension

bracket I
Fan body
Suspension

bracket III

Fan body
Suspension
bracket III
Suspension
bracket II
Fan body
6
Fan body
Fig.1
Suspension
bracket I
Fig.2-1
Suspension
bracket III
Fig.2-2
Suspension
bracket I
Fig.2-3
Suspension
bracket I
Fig.2-4