Hdmi Cec Control Input Source Selection; Hdmi Cec Control One Touch Play; Hdmi Cec Control System Standby - Toshiba M74 Series User Manual

HDMI CEC Control input source
selection
If an HDMI CEC Control device with HDMI switching
capability (e.g. AV amplifier) is connected to the HDMI
input, you can select another HDMI CEC Control device
that is connected to the master HDMI device on the input
source list.
a
o
Press and a list will appear on screen showing
available input sources.
b
Press b to select the input source that the HDMI
CEC Control devices are connected.
c
c
Press and a second selection screen will appear
showing all connected HDMI CEC Control
equipment.
Inputs
TV
o 1
o 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
d
B b
Press / to select the desired input source,
and then press OK.
NOTE:
• These functions depend on the device connected.
If you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.
• If the HDMI cable from connected equipment is
changed, Enable in the HDMI CEC Control Setup menu
may need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable HDMI
CEC Control item on the HDMI CEC Control Setup
menu from Off to On.

HDMI CEC Control one touch play

When connected equipment is switched on, HDMI CEC
Control will automatically detect the television through the
input selection. If the television is in Standby, it will be
These functions can be enabled or disabled from the
HDMI CEC Control Setup (see page 86).
NOTE:
• Even if the equipment is showing a menu, the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.
• Even if the HDMI cable is connected during PVR
playback, the television does not automatically display
the HDMI input signal.

HDMI CEC Control system standby

If the television is turned off (Standby), the television will
send a message to turn off (Standby) all of the HDMI CEC
Control devices connected to the television.
These functions can be enabled or disabled from the
HDMI CEC Control Setup (see page 86).
1 DVD
2 VCR/DVR
NOTE: This feature depends on the connected equipment
3 CBL/SAT
and television state.
4 GAME/TV
5 AUX
87
CONTROLS AND FEATURES
switched on automatically.