Execution examples
Command
SR<CR>
3.7.11. Scan Stop
Command mnemonics : NS
Description of function
When the NS command is received during forward/reverse scanning, normal playback is set and the
completed status (R) is returned.
When the NS command is received in modes other than forward/reverse scanning, it is not processed and
the completed status (R) is returned.
Execution examples
Command
NS<CR>
3.7.12. Search
Command mnemonics : (Address)SE
Description of function
- When the SE command is received in the normal play/pause/stop/slow/reverse slow mode, the specified
address is searched for then the pause mode (Still) is set and the completed status (R) is returned.
If pause is prohibited at the point searched, the normal play mode is set and the completed status (R)
is returned.
If the specified address is search-prohibited, error (E04) is returned.
If the specified address does not exist, error (E12) is returned.
If no address is specified, error (E06) is returned.
- When the SE command is received during forward/reverse scanning, the specified address is searched
for then the normal play mode is set and the completed status (R) is returned.
If pausing is prohibited at the point searched, the normal play mode is set and the completed status (R)
is returned.
If the specified address is search-prohibited, error (E04) is returned.
If the specified address does not exist, error (E12) is returned.
If no address is specified, error (E06) is returned.
- If the SE command is received when the specified address is not a valid address mode, error (E04) is
returned.
If the address mode is CH (Chapter)/TM (Time) while in the Stop mode, error (E04) is returned.
Status
BD player operation
Pausing (Still)
Picture moves one step backward.
R<CR>
Pausing (Still)
Status
BD player operation
During forward/reverse scanning
Normal playback is set.
R<CR>
Page 23 of 39