Table of Contents
Advertisement
3.2.2. Error Status
The error status is expressed as an "E" followed by a 2-digit error number.
【Ex.】
E04<CR>
3.2.3. Request Status
Commands including "?" are request commands. Information corresponding to the command and the terminator
(<CR>) is returned.
When multiple request commands are issued within the same command string, each is terminated by <CR> and
the status is returned.
? R? C<CR> →
【Ex.】
3.3. Power-ON Processing
When the Power ON or PLAY command, or the [Power]/[Play]/[Power On] remote control button command is
received when the power is off, the power turns on and the command is executed.
When the power is off, any other commands are ignored.
3.4. Error Status
When a problem occurs during command processing, an error code is returned (example: "E04<CR>").
Code
Error type
E04
Feature not available
E06
Missing Argument
E11
Disc does not exist
E12
Search Error
E15
Picture stop
E16
Interrupt by Other device
E99
Panic Error
3.5. List of Commands
Below is a list of the RS-232C commands. For details on individual commands, refer to section 3.7 Command
Details in this manual.
Playback-related commands (*1) are only valid for BDMV/BDAV/DVD-Video/DVD VR/CD-DA/DTS-CD
discs. If other application formats are detected, error (E04) is returned.
(*1) Playback-related commands: Stop/Play/Advanced Playlist Playback/Pause/Still/Step/Forward/
Step Reverse/Scan Stop/Search/Search & Play/Stop Marker/Current Address Request/Slow/Time
01<CR>
05<CR>
Description
Attempt has been made to execute a function that cannot be used
- Command mnemonics are wrong (mode cannot be used)
Proper parameter has not been specified
No disc is loaded
Search address cannot be found
Picture stop
- Still picture has been set by picture stop code during auto play
Interruption by other device during command execution
Failure to close the tray
Page 10 of 39
Advertisement
Table of Contents
