• Insert the nuts and washer onto the suspension bolts
for locking the suspension bolts on the ceiling.
• Mount the suspension bolts to the anchor-nuts firmly.
• Secure the Installation plates onto the Suspension
bolts (adjust level roughly.) using nuts, washers and
spring washers.
• Engage 2 hooks on the both left and right side
of the unit to the lower slot of Installation Plates.
• Adjust a level with a level gauge on the direction
of left-right, back-forth by adjusting suspension
bolts.
• Move the hooks on the unit to the upper slot of
Installation Plates. Then the unit will be declined
to the bottomside so as to drain well.
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1)
Suspension
bolts
Spring
washer
Nut
max.
Washer
12mm
2)
Level gauge
Suspension
- 25 -
Anchor nut
Ceiling
Nut
Washer
Suspension
bolts
Lower slot
Adjust a level
bolt
Installation plate
Upper slot
LGE Internal Use Only