Healthrider H105t User Manual page 11

10. With the help of a second person, hold the
Pulse Bar Top (86) near the Pulse Bar Bottom
(87). Insert the pulse wire from the Pulse Bar
Top into the hole in the top of the Pulse Bar
Bottom and pull it out of the hole in the Pulse
Bar Bottom.
Attach the Pulse Bar Top (86) to the Pulse Bar
Bottom (87) with two #8 x 3/4" Screws (2) and
six #8 x 1/2" Screws (1) in the locations shown.
Be careful not to pinch the pulse wire. Start
all eight Screws, and then tighten each of
them.
11. With the help of a second person, hold the
Left and Right Handrails (81, 82) near the Base
(91). Slide the lower ends of the Handrails into
the holes on the top of the Right and Left Base
Covers (84, not shown).
10
87
1
2
11
82
84
11
86
1
1
Pulse
1
Wire
2
81
91
1
1