Healthrider H105t User Manual page 10

8. Set the console assembly on the brackets on
the Left and Right Uprights (88, not shown). Be
careful not to pinch any wires.
Attach the console assembly with four 5/16" x
1 1/4" Patch Bolts (4) and four 5/16" Star
Washers (11) (only one side is shown). Start all
four Patch Bolts, and then tighten each of
them.
Insert the excess Upright Wire (77) into the hole
in the console assembly. Tighten the ties around
the Upright Wire and cut off the ends of the ties.
9. Identify the Left and Right Handrails (81, 82).
With the help of a second person, attach the
Handrails to the Pulse Bar Bottom (87) with four
3/8" x 3/4" Patch Bolts (9). Start all four Patch
Bolts, and then tighten each of them.
8
77
Ties
9
9
81
10
Console
Assembly
Bracket
11
4
87
9
82
88