Table Of Contents - Ergo Systems 20008D Owner's Manual

Installing batteries in the Timer Module.
Step 1
Remove the Digital Timer from the base by rotating it in
anticlockwise direction.
Step 3
Open the battery compartment by pushing the plastic tab
to the left and lift up.
Step 5
Close and latch the cover.
Fig 8
Fig 4
Fig 6
Step 2
You will find the Battery compartment at the back of the
Timer Module.
Step 4
Install 3 new AAA batteries in the battery compartment.
NOTE:
Always install new batteries. When you replace the old battery
you must do it within 1 minute or you will loose the programs.
THE TIMER WILL MAKE A BEEPING
SOUND WHEN THE BATTERY IS LOW
5
Fig 5
Fig 7