Page 1
Date Purchased Month ________________ Read and keep this manual for Day __________________ future reference. Year __________________ This manual contains important information on Safety, Assembly, Model No. ______________________ Operation and Maintenance. Serial # ______________________ Ergo Systems Inc. Rev# 1.2...
The extent of Ergo Systems Inc. under this limited warranty is the repair or replacement of the product at the sole discretion of Ergo Systems Inc, In no event shall Ergo Systems Inc. ’ s. liability exceed the purchase price paid by the purchaser.
Page 3
List of parts in the 8 day Autopetfeeder Box Components 1. Base 2. Bowl Cover 3. Bowl 4. Ice Pack 5. Digital Timer 6. Bowl Cover Handle 7. Cover Lock Screw 8 Day Feeder Base Bowl Cover Bowl RECORD RESET HOUR ON/AUTO/OFF PROG...
Page 4
Assembly The 8-Day Autopetfeeder comes as a pre-assembled unit. Cover Lock Screw Fig-1 Bowl Cover Alignement Step 1 p Remove the cover lock screw from the Bowl cover handle. Fig-2 Step 2 p Remove the three screws to remove the Bowl Cover Handle.
Page 5
Installing batteries in the Timer Module. Step 1 Step 2 p Place the feeder bottom side up. You will p Open the battery compartment by pushing find the battery compartment at the back of the plastic tab to the left and lift up. the Timer Module.
RESET RECORD HOUR ON/AUTO/OFF PROG p Press the PROGRAM button to switch from the present mode to the next mode i.e. from 24 hour to AM/PM or AM/PM to 24 hour mode. Fig-2 1.1 Setting the Current Time RESET RECORD HOUR ON/AUTO/OFF PROG...
Page 8
RESET RECORD HOUR ON/AUTO/OFF PROG p Press the MINUTE button to set the MINUTE. Fig-5 RESET RECORD HOUR ON/AUTO/OFF PROG p Press ON/AUTO/OFF button to go back to clock mode. Fig-6 NOTE: The seconds setting cannot be altered. 1.2 Understanding the Timer p The autopetfeeder is capable of feeding your pet up to 8 times per day.
Page 9
1.3 ON/AUTO/OFF Now let us understand the different modes of operation in the timer. RESET RECORD RESET RECORD HOUR ON/AUTO/OFF HOUR ON/AUTO/OFF PROG PROG Fig-7 Fig-8 p Press ON/AUTO/OFF button to toggle p In TEST mode the bowl cover rotates between TEST, AUTO and OFF mode.
1.4 Setting the Program Mode RESET RECORD p Press the PROGRAM button to HOUR ON/AUTO/OFF PROG enter into program mode. The display will show 1 whch means that we are setting the 1 schedule. Fig-11 1.5 Timer Programming Examples : p Let us set a schedule for 7.10 am.
PROGRAM TO FEED CHART No. of No. of Feeds / Day Programs Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7 Day 8 RESET RECORD HOUR ON/AUTO/OFF PROG p Press the PROGRAM button again to exit from the program mode to CLOCK mode.
Page 12
Fig-18 Now your 8 Day Autopetfeeder is ready to feed your Pet 8 Times a Day or as per the program/feed Chart. Corporate office E-mail Toll-Free Phone.US only Ergo Systems Inc., contact@autopetfeeder.com 1-888-ERGOSYS 1103 S.Westwood Ave. (1-888-374-6797) Addison IL 60101...
Need help?
Do you have a question about the 20008D and is the answer not in the manual?
Questions and answers