Download
Share
Print this page
Ergo Systems 20008D Owner's Manual
  1. Manuals
  2. Brands
  3. Ergo Systems Manuals
  4. Pet Care Product
  5. 20008D
  6. Owner's manual

Ergo Systems 20008D Owner's Manual

8 day autopetfeeder
Hide thumbs Also See for 20008D:

Advertisement

Quick Links

Download this manual
8 Day Autopetfeeder
MODEL NO.
20008D
Model and serial number may be found
at the rear of the 8 Day Feeder base.
Please record both model and serial
number in a safe place for future use.
Where Purchased
:
Date purchased
: Month
: Day
: Year
Model No.
:
Serial #
:
Owner's Manual
This Owner's Manual contains
information for all models.
Read and keep this manual for future
reference.
This manual contains important
information on Safety, Assembly,
Operation and Maintenance.
Ergo Systems Inc. Rev # : 1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 20008D and is the answer not in the manual?

Questions and answers

Related Manuals for Ergo Systems 20008D

Summary of Contents for Ergo Systems 20008D

  • Page 1 Date purchased : Month Read and keep this manual for future : Day reference. : Year This manual contains important Model No. information on Safety, Assembly, Serial # Operation and Maintenance. Ergo Systems Inc. Rev # : 1.1...
  • Page 2 Modified or repaired by anyone other than Ergo Systems Inc. The extent of Ergo Systems Inc. under this limited warranty is the repair or replacement of the product at the sole discretion of Ergo Systems Inc. In no event shall Ergo Systems Inc. ’ s liability exceed the purchase price paid by the purchaser. Under no circumstances shall Ergo Systems Inc.
  • Page 3 List of parts in the 8 Day Autopetfeeder Box Components 1. Base. 2. Bowl Cover. 3. Bowl. 4. Ice Pack 5. Digital timer 6. Bowl Cover Handle 8 Day Feeder Base Bowl Bowl Cover Ice Packs Digital timer (Quantity 4) Bowl Cover Handle...
  • Page 4 Assembly The 8-Day Autopetfeeder comes as a pre-assembled unit. Fig 1 Now the digital timer needs to be programmed for the unit to work automatically. Follow the steps below to program the timer. Bowl Cover Alignment Check to see if the bowl cover aligns with the feed bowl. If the alignment is correct go to Step 3.

  • Page 5: Table Of Contents

    Installing batteries in the Timer Module. Step 1 Step 2 Remove the Digital Timer from the base by rotating it in You will find the Battery compartment at the back of the anticlockwise direction. Timer Module. Fig 5 Fig 4 Step 3 Step 4 Open the battery compartment by pushing the plastic tab...
  • Page 6 TIMER PROGRAMMING This is the Digital Timer unit for 8 Day Autopet Feeder. The timer works on 3 AA batteries. With this Digital Controller Module you can record your voice which will be played back every meal time. Records your voice up to 7 Seconds. NOTE: - Remove bowl cover to program the timer.
  • Page 7 Press the PROGRAM button to switch from the present mode to the next mode i,e. from 24 hour to AM/PM or AM/PM to 24 hour mode. Fig 2 1.1 Setting the Current Time Press the HOUR and MINUTE button simultaneously to activate the setting mode.
  • Page 8 Press the MINUTE button to set the MINUTE. Fig 5 Press ON/AUTO/OFF button to go back to clock mode. Fig 6 NOTE: The seconds setting cannot be altered. 1.2 Understanding the Timer The autopetfeeder is capable of feeding your pet up to 8 times per day. You can set the time for the feeder up to 8 times per day.

  • Page 9: Step

    1.3 ON/AUTO/OFF Now let us understand the different modes of operation in the timer. Press ON/AUTO/OFF button to toggle between TEST, AUTO and OFF mode. The display will show the mode in which the timer is set Fig 7 In TEST mode the bowl cover rotates 45 degree and enters the next feed compartment.

  • Page 10: Step

    In OFF mode the feeder does not work. Fig 10 1.4 Setting the Program Mode Press the PROGRAM button to enter into program mode. The display will show 1 which means that we are setting the 1st schedule. Fig 11 1.5 Timer Programming Examples:- Let us set a schedule for 7.10 am.

  • Page 11: Step

    Press the MINUTE button till the display shows 10. Fig 13 Press the PROGRAM button again and the display will show 2 which means that we are setting the second feed time. Fig 14 PROGRAM TO FEED CHART...

  • Page 12: Step

    Press the PROGRAM button again to exit from the program mode to CLOCK mode. Fig 15 NOTE: To exit out of program mode press PROGRAM button until you see the CLOCK mode appear. 1.6 Recording Voice Press the RECORD button to record your voice, a record time bar will appear on the display which indicates the memory level..

  • Page 13: Step

    1.7 Setting Feeder in Auto Mode Press the ON/AUTO/OFF button until the display shows AUTO, to set the feeder in AUTO mode. Fig 18 Now your 8 Day Autopetfeeder is ready to feed your Pet 8 Times a Day or as per the program / feed chart.
  • Page 14 Can I feed cats and dogs? Yes! You can feed cats, dogs and any other pet which will eat from a bowl. What kind of food can I put in the feeder? Unlike the AutoPetFeeder, you can use both dry and wet canned food in the 8 Day Feeder. Is the timer easy to program? The 8 Day Feeder comes with a digital timer that can be easily programmed in a few minutes.
  • Page 15 Corporate Office E-Mail Toll-Free Phone. US only Ergo Systems Inc., contact@autopetfeeder.com 1-888-ERGOSYS 1105 S. WestWood Ave, (1-888-374-6797) Addison, Website International Phone IL 60101. http://www.autopetfeeder.com 1-630-543-7686 Warranty Registration http://www.autopetfeeder.com/warranty.asp 1-630-839-3321...