Digital Telephone Controls And Indicators - Fujitsu IP Pathfinder S User Manual

1BEFOREUSES

DIGITAL TELEPHONE CONTROLS AND INDICATORS

■ Face
Handset
■ Bottom
Line code
Recording jack
※The insert sheet is option (the available accessory).
【The insert sheet of the available accessory】
・FC780TC41 : For FC781A, Ten pieces
・FC780TC42 : For FC781B, Ten pieces
・FC780TC43 : For FC782B/D/PA/PB, Ten pieces
＜FC782D ＞
Ringer LED
Microphone（only FC782D）
Handset code
Programmable Line / Feature Buttons
All buttons can be used to automatically dial
either an extension or others.
Dial Buttons
RG TONE Press this key to change the ringing
tone.
Local telephone directory can be
DIR
operated.
Use these keys to change the ringing
tone volume, speaker volume, handset
volu m e, display co ntrast, a n d
retrieval of telephone book.
Function Buttons
FLASH Press this key to terminate a call
without replacing the handset.
ICM Press this key for extension call
and answering.
ABBD Dial Press this key for abbreviated
dialing.
REDIAL Press this key to redial number.
DEL Press this key to clear the local
telephone directory's data.
TRANSFER Press this key to transfer a call to
another telephone.
MUTE Press this key to turn off the
microphone.
REG Press this key to register the local
telephone directory's data.
HOLD Press this key to hold an outside or
extension call. Press the ICM or the
LINE button to resume call.
CHR Press this k ey to sw itch the
character input mode.
SPEAKER
Press this key to dial without
lifting handset. Only FC782D can
use the handsfree by pressing this
button.