System Requirements - LG DRD-8120B Owner's Manual

Features
Features
E-IDE interface
Data transfer rate (DVD-ROM max-12X-speed:16,200KB/sec, CD-ROM
max-40X-speed : 6,000KB/sec)
Random access time (DVD-ROM: 120ms Typical, CD-ROM:100ms Typical)
Intelligent 512KB data buffering system
Small CPU bandwidth (MPC spec.)
Motorized tray loading system
Horizontal/Vertical mounting support
Designed for internal mounting
Emergency eject support
Supports Windows 95, 98 & 2000 Plug-and-Play ATAPI protocol
Multimedia PC MPC III compliant
Photo CD multisession support
Supports Region playback control Phase II

System Requirements*

IBM PC AT or compatible, Pentium-266MHz processor or higher
(higher recommended).
A minimum of 16MB memory (higher recommended).
A suitable free standard 5
MS-DOS version 3.1 or higher. (Windows 95 and above recommended).
3 / " 1.44 Mb Floppy Drive.
1
2
An existing IDE controller with an available cable connector or a new IDE controller (rec-
ommended with IDE PIO Mode 4 capability) that you will need to install.
* Please note: Certain software (i.e. particularly those including Video playback) may require
a considerably increased specification PC to give acceptable results.
While this DVD-ROM drive can read DVD-video discs, decoding them to display on your
pc's monitor requires separate MPEG decoding that is done by separate hardware (either
an MPEG decoder card or MPEG decoding done by your video card), or
separate software that you install to do MPEG decoding. For further details, refer to
the documentation that comes with MPEG software.
/ " internal drive bay.
1
4
E-5