Section 9-Maintenance; Daily Cleaning - Invacare Polaris EX CPAP with SoftX ISP3000 Operator's Manual

SECTION 9—MAINTENANCE
Disconnect the Polaris EX CPAP unit power cord plug
before cleaning the unit, then allow the unit to dry
completely before plugging it in or operating it.
NEVER submerge the unit in any cleaning solution or
water.N
DO NOT use bleach, chlorine-based, alcohol-based, or
aromatic-based solutions to clean the cushion, mask, air
tubing, or air filter. These solutions may cause material
hardening and reduce the life of the product.
If the Polaris EX CPAP unit is not functioning properly, refer
to General Guidelines on page 5 or Troubleshooting on
page 39.
Your Polaris EX CPAP unit is designed to provide several
years of trouble-free operation. Regular routine servicing
should not be necessary if you follow these maintenance
recommendations.
NOTE: Refer to manuals provided with headgear and mask for
cleaning recommendations and instructions.

Daily Cleaning

1. After daily use, wipe the inside and outside of the mask
frame and nasal cushion with a clean, damp cloth.
2. Disconnect the air tubing from the Polaris EX CPAP unit
and hang the tubing and mask in a clean, dry location,
avoiding exposure to direct sunlight, until the next use.
Part No 1110559
SECTION 9—MAINTENANCE
WARNING
35 Invacare® Polaris™EX™